Skip Ribbon Commands
Skip to main content


Ammunition Operations



  • AMC-R 350-4 Training and Certification Program for Personnel Working in Ammunition Operations, dated 22 November 2017 This regulation establishes a training and certification program for personnel involved with planning, handling, storage, surveillance, maintenance, production, demil/destruct/treatment and transportation operations of ammunition and explosives (A&E) in accordance with (IAW) DA PAM 385-64 (Ammunition and Explosive Safety Standards) and IAW DA PAM 385-61 (Toxic Chemical Agent Safety Standards) for toxic and chemical agents and munitions. It requires that installations and activities ensure that only trained and certified personnel are permitted to participate in operations involving munitions. This program is designed to increase munitions safety awareness, technical knowledge and operational proficiency of employees. For clarity, within this regulation, A&E refers to all live explosives, components, packaging, dummy/drilled/inert filled and non-standard conventional and toxic chemical munitions, as well as large rockets and guided missiles.
  •  AMC-R 700-77 Installation Ammunition Support dated 12 June 2017  gives detail to regulatory guidance and responsibilities for the various agencies or activities that are involved in the management and handling of ammunition.  It establishes policies, procedures and responsibilities for ammunition management, support organizations and customers supported by these activities.
  • DA PAM 700-16 The Army Ammunition Management System This Department of the Army pamphlet provides an overview of the Army Ammunition Management Program, key procedures, and references. It is designed to describe the system and basic procedural guidance for full life cycle ammunition management and is to be used in conjunction with applicable references for ammunition management. This includes ammunition research, development, and acquisition; distribution, storage, and maintenance; and production base readiness, management, and stock control procedures.
  • Joint Conventional Ammunition Policies and Procedures October 2017 Objectives of the SMCA mission, as stated in reference (a), are to achieve the highest possible degree of efficiency and effectiveness in the DoD operations required to acquire top quality conventional ammunition, and also in the wholesale conventional ammunition logistics functions. The guidance known collectively as JCAPPs is aligned with the topical paragraphs of DoDI 5160.68 (reference (c)); is in consonance with the authorities and responsibilities assigned in the SMCA Charter (reference (d)); is jointly developed, approved, and published by the JOCG; and reflects agreements among the Military Services and SMCA to achieve these objectives.
Munitions Serialization List.aspx
Reference6/12/2018 9:23 AM
AIN 045-18A AR 702-12 Table 3-1 Quality assurance specialist (ammunition surveillance) technical assistance.pdf
Reference5/21/2018 11:28 AM
Reference5/21/2018 11:28 AM
DODIC Cross-reference List - New Items Replacing Old Items - as of 28 Mar 18.aspx
Report5/11/2018 4:26 PM
UXO - Unexploded Ordnance Videos.aspx
Learning Material5/10/2018 2:51 PM
MMRP Poster 17x11.pdf
Presentation5/9/2018 5:37 PM
MMRP Poster 14x8.pdf
Presentation5/9/2018 5:36 PM
MMRP Poster 11x8.pdf
Presentation5/9/2018 5:36 PM
UXO hand poster.pptx
Presentation5/9/2018 5:35 PM
Magazine Placard Poster.pdf
Presentation5/9/2018 5:34 PM
Safety Poster PS Magazine.pdf
Presentation5/9/2018 5:29 PM
Klulis UXO.pdf
Presentation5/9/2018 5:28 PM
FY 18 Automatic Returns List.aspx
Reference4/25/2018 9:34 AM
A and E Amnesty Collection Container Requirement.docx
Report4/24/2018 9:26 PM
Reference4/24/2018 5:58 PM
DA PAM 350-38 Standards in Training Commission STRAC.aspx
Reference4/24/2018 5:46 PM
Safety Awareness Message - Discovery of Unexploded Ordnance.docx
Lessons Learned4/19/2018 11:45 AM
Reference4/16/2018 8:49 AM
Propellant Management Guide June 2014.aspx
Reference4/12/2018 9:19 AM
DD Form 157X Series Color Tags.aspx
Reference4/12/2018 8:45 AM
MIL STD 636A, Visual Inspection Standards for Small Arms Ammuntion Through Caliber .50.aspx
Reference4/12/2018 8:42 AM
DOD 5100.76-M Physical Security of Sensitive Conventional Arms Ammunition and Explosives.aspx
Reference4/12/2018 8:33 AM
Physical Security and Stock Management PSSM identification cards.pdf
Presentation4/11/2018 10:24 AM
Coalition Ammo Storage Policy 1.pdf
Reference4/11/2018 10:22 AM
ATP 4-35.1 Ammunition and Explosives Handler Safety Techniques.aspx
Reference4/11/2018 10:20 AM
Exception to Policy Approval for Requiring Ammunition Supply Points (ASPs) to maintain Requestor and Approver DA Form 1687.aspx
Reference4/11/2018 9:16 AM
MIL STD 1386 Loading of Hazardous Materials in MILVAN Containers.aspx
Reference4/10/2018 3:10 PM
TM 4-48.10 - MCRP 4-11.3E, Vol ll - NTTP 3-04.12 - AFMAN 11-223 l , Vol ll - COMDTINST M13482.3B Multiservice Helicopter Sl.aspx
Reference4/10/2018 3:06 PM
TM 4-48.11  MCRP 411.3E Vol lll AFMAN 11223 l Vol lll NTTP 304.13 COMDTINST M13482.4B Multiservice Helicopter Sling Load.aspx
Reference4/10/2018 3:05 PM
Transportation HAZMAT Appointment Orders and Certification Statements.pdf
Learning Material4/10/2018 2:56 PM
1 - 30Next